Panasonic DMP-BDT460 Owner's Manual page 28

TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are cut
off so the picture
4:3 Pan &
fills the screen.
Scan
When playing
BD-Video, video is output as "4:3
Letterbox".
Black bands
4:3
appear at the top
Letterbox
and bottom of the
picture.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio
16:9 image in the center of the
screen.
Video is displayed as a
16:9 Full horizontally stretched 16:9
image.
Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to "On":
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
Status Messages
Choose whether to show status messages
automatically.
HDMI CEC
Set to use "HDMI CEC" function when
connected via HDMI cable to a device that
supports "HDMI CEC".
≥ Select "Off" when you do not want to use
"HDMI CEC".
∫ Unit Settings
Press [OK] to show the following settings:
28
SQT0080
Mixed Data Disc Option
Select the playback contents on discs with both
data files and Video.
≥ If "MP3/JPEG/MKV" is selected, data file can
be played back.
≥ If "BDAV/AVCHD" is selected, BDAV and
AVCHD can be played back.
Front Panel Display
Changes the brightness of the unit's display.
≥ If "Auto" is selected, the display is set to bright
and only dimmed during playback.
Blue LED [BDT460] [BDT361/360_for_U.S.A.]
Set whether to light the blue LED in the center
of this unit when turned ON.
HDMI(SUB) V.OFF LED Control [BDT460]
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when "HDMI(SUB) Output
Mode" ( 25) is set to "V.OFF".
Edit User Information
Change the user information registered in the
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. ( 15)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to "On", the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to "Off".
(Power consumption
∫ Remote Control Code
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (
Press [OK] to show the following settings:
34)
13)