F O R YO U R L A P TO P C S V- 3 24 2 H D A M A N U A L Hardware Installation Step 1 Step 2 14.64" (372mm) Button USB 3.0 Power USB 3.0 Hub DVI/VGA/HDMI Ethernet SD/TF Card Earphone www.club-3d.com...
3. Following the on-screen instructions. *At least one free USB 3.0/ 2.0 port. *Access to a CD-ROM drive or: *Network access for software downloads Note: The screen may flash or go black during the install. 4. Reboot your computer after driver installation www.club-3d.com...
Page 4
Install in mirror mode will extend the displays. 2. Choose Ethernet Driver Verification Once the driver installation for USB Universal Docking Station is finished, you can go to Device Manager to verify if your Ethernet Adapter is properly installed. www.club-3d.com...
Page 5
1. To configure the settings for each of your USB attached displays, select pane enables this feature. Displays from the System Preferences menu. This will open a Display Preferences window on each of your attached displays allowing you to configure each display as required. www.club-3d.com...
Page 6
Reboot your PC after driver installation. Plug the USB 3.0 Docking Station onto the USB port of your PC, then connect your network cable to the ethernet port of the docking station. Go to system Preferences->Network->USB 3.0 Dual Display. Green bullet means successful installation and function works normally. www.club-3d.com...
Need help?
Do you have a question about the CSV-3242HDA and is the answer not in the manual?
Questions and answers