Table of Contents
Advertisement
BA_CETA100_EbV_EN_0450021000_0931-10.book Seite 10 Dienstag, 25. August 2009 3:33 15
Mounting
6. Mounting
Hazard!
Mounting must be performed by an authorised professional electrician!
Ensure that unit is de-energised before opening it!
10
Drilling pattern for wall fastening
1. Remove terminal area cover from
casing.
2. For mounting, first put a screw
into the wall.
3. Hang controller into the opening.
4. Use controller as template for the
other screw holes.
Rail mount
1. Insert mounting feet into rail
mount opening.
2. Lock hook in place by pushing
down.
Advertisement
Table of Contents
