Installation - Sony MEX-N5150BT Operating Instructions Manual

Installation

Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1
Pinch both edges of the protection collar
, then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket , then
pull up the unit to separate.


Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 34).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

34
GB
182 mm (7 1 /
53 mm (2 1 / in)
8
Catch
2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA

Bracket
Existing parts supplied with
3 /
32
your car
NISSAN

in)
4
Bracket
Existing parts supplied with
your car



to dashboard/center console
Bracket
to dashboard/center console
Bracket

