Download Print this page

Bush heritage ii Quick Start Manual page 4

Dab+ radio with wi-fi, bluetooth, internet radio and multi-room
Hide thumbs Also See for heritage ii:

Advertisement

6. BLUETOOTH / NFC
You can play music from any Bluetooth-enab
through your Heritage II Connect.
BLUETOOTH:
Press the MODE button until "Bluetooth Mode"
appears on the screen.
Enable bluetooth on your device and select your
DAB Digital Radio from the devices list. It will
read: Heritage II.
Select the song you want and press play.
NFC:
Press the MODE button until "Bluetooth" appears
on the screen.
Make sure your smartphone is set to visible and
turn on NFC.
Hold close or TAP your smartphone to the
(NFC logo) mark located on top of your product.
Note: If pairing is not successful you may need to
rotate your smartphone while on the
located on top of the product.
led device
Bluetooth
Mode
mark
7. UNDOK SMART APP CONTROL
You can control the product using your smartphone with the
UNDOK App installed. Multiroom and Control Volume,
Mode & Stations using UNDOK for the products in the
kitchen, bedroom or living room.
Download UNDOK App from App Store for your
iOS smartphone or download from Google Play
for your Android smartphone.
Connect your radio to the same WI-FI network
as your smartphone. Start UNDOK App.
All available devices will be listed. Tap your radio
"Heritage II" to connect to, then you can control
your radio by using your smartphone to switch
mode, play music, etc.
For more information and a full version
of the User Guide for this product, visit
http://www.bushaustralia.com.au/heritage-ii-connect
Internet
Mode

Advertisement

loading