On-Hook Dialing; Handsfree Operation - Mitel M2008 User Manual

M2008 Phone User Guide
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial 58.
3. Enter an index number between 00 and 09.

On-Hook Dialing

To dial without lifting the handset:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Dial the number.
3. Lift the handset.

Handsfree Operation

This section applies to the M2008HF and M2008HFD models.
To use Handsfree Operation to make calls:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Dial the number.
3. Communicate by using the speaker and the microphone.
To use Handsfree Operation to answer calls:
1. Press the flashing line key.
2. Communicate by using the speaker and the microphone.
To hang up while using Handsfree Operation:
•
Press CANCEL.
To temporarily disable the microphone during Handsfree Operation:
•
Press HANDSFREE/MUTE (the indicator turns off).
To re-enable the microphone and return to the conversation:
•
Press HANDSFREE/MUTE (the indicator turns on).
To disable Handsfree Operation:
•
Lift the handset.
12