Preparation - Beko CN158230X User Manual

4

Preparation

Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not
be located under direct sunlight.
The ambient temperature of the room
where you install your refrigerator
should at least be 10°C. Operating
your refrigerator under cooler
conditions is not recommended
with regard to its efficiency.
Please make sure that the interior of
your refrigerator is cleaned thoroughly.
If two refrigerators are to be installed
side by side, there should be at least
2 cm distance between them.
When you operate your refrigerator
for the first time, please observe
the following instructions
during the initial six hours.
The door should not be
opened frequently.
It must be operated empty
without any food in it.
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings
in the "Recommended solutions
for the problems" section.
Original packaging and foam
materials should be kept for future
transportations or moving.
provided with the chill compartment
must always be in use for low
energy consumption and for
better storage conditions.
Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption
of the appliance. Thus any contact
with the sensor(s) must be avoided.
In some models, the instrument panel
automatically turns off 5 minutes
after the door has closed. It will
be reactivated when the door has
opened or pressed on any key.
13
EN