Table of Contents
Advertisement
Available languages
Available languages
Place the juice cup under the tube mouth fig.5.
•
In order to prevent splashing, or in case the juice is intended to be put in refrigerator, the
upper cover of the juice cup may be put on.
•
During pouring the juice into a glass cup, in order to separate the foam from the juice, it is
possible to slide the foam retainer plate into the juice cup.
Note: If you want to have a juice with foam, don't put retainer plate in.
OPERATION METhOD
It is possible only by assembling all the components correctly: put on the upper cover and lock
up it, and lock up the fastening cramps, then the juicer can be used normally.
1)
Clean the fruit or vegetable, and cut it into cubes to be able to be put into the feeding tube.
2)
Make sure that the juice cup has been placed under the outlet.
3)
Get the power supply turned on, set the control knob to 1 (low speed), or 2 (high speed).
Speed 1: fit to be used for soft fruits or vegetables, such as water melon, grape, tomato and
cucumber.
Speed 2: fit to be used for comparatively hard fruits or vegetables, such as apple, carrot,
and celery stem.
4)
Feed the cut cubes into the feeding tube, and use the propeller to gently press them to the
rotating filter.
Fig. 5
ENG - 26
Advertisement
Table of Contents
