Table of Contents
Advertisement
Available languages
Available languages
BE SURE:
•
Not to use excessive force to press the propeller, since such a way may influence the quality
of the juice, and may cause the filter to stop rotating as well.
•
Never to stretch fingers or other objects into the feeding tube.
•
When all the materials are processed up and there is no more juice flowing out, turn off the
juicer and pull out the plug, and wait till the filter stops rotating completely.
TIPS fOR OPERATION
•
It is necessary to use fresh fruits or vegetables, because the fresh fruits or vegetables contain
more juice. Pineapple, beet, celery stem, apple, cucumber, carrot, various gourds, tomato,
pomegranate, orange and tangerine, and grape are especially fit to be juiced in the juicer.
•
It is unnecessary to remove the tender peel or thin peel off the fruits, only the thick peel needs
to be removed in advance, e.g.: orange and tangerine, pineapple and raw beet.
•
In juicing apples, the juice thickness depends on the variety of the apple. The more juice an
apple contains, the thinner the juice will be. Please choose the apple variety in compliance
with your favor. The apple juice will turn yellow very soon, and putting some drops of lemon
juice in will prolong the turning-yellow time.
•
The starch-containing fruits such as banana, papaya, avocado, fig, mango, etc. are not fit to
be juiced with the juicer. Such fruits may be processed with fruit processing machine, mixer
and flour-kneading machine.,
•
Leaf vegetables and their stems can also be juiced, it is necessary to press the propeller
slowly.
•
The juicer is not fit for juicing fruits and vegetables that are especially hard, of multiple fivers
and contain rich starch, such as sugar cane.
CLEANING
•
If cleaned immediately after being used, it is especially easy to be cleaned.
•
Don't use abrasive agent, scrubber, acetone, alcohol, etc. to clean the juicer.
•
All the dismountable components may be cleaned in a dish-washing machine.
•
The dismountable components shall be placed on the top-part tray, so as to ensure that the
position where they are placed is far away from the heating element.
Postup:
1)
Turn the juicer off, pull off the plug from the socket, and wait till the filter stops rotating com-
pletely.
2)
Dismantle the juicer in the following order;
Take the propeller off;
Unlock the fastening cramps;
Take the upper cover off;
Take the residue keg off;
Take the juice collector off together with the filter.
3)
Clean these components with the cleaning brush that has been dipped in the lukewarm boi-
led water with a little cleaning agent in it, then washing them under the running water tap.
4)
It is allowed to wipe the electric motor assembly of the machine body with a wet cloth.
ENG - 27
ENG
Advertisement
Table of Contents
