Indicator
Name
Comes on for a few seconds when you set
●
the power mode to ON, then goes off.
Comes on along with a beep when a
●
problem is detected. A system message on
the multi-information display appears at
System
the same time.
Message
Indicator
Turn Signal
Blinks when you operate the turn signal
●
and Hazard
lever.
Warning
Blink along with all turn signals when you
●
Indicators
press the hazard warning button.
Comes on when the high beam headlights
●
High Beam
are on.
Indicator
Comes on whenever the light switch is on,
●
Lights On
or in AUTO when the exterior lights are
Indicator
on.
On/Blinking
I n f o r ma t i o n P r o v i d e d b y :
Explanation
While the indicator is on, press the
●
(information) button to see the
message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
The multi-information display does not return
●
to the normal screen unless the warning is
canceled, or the
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 491, 492
—
If you set the power mode to VEHICLE
●
OFF (LOCK) while the exterior lights are
on, a chime sounds when the driver's
door is opened.
uuIndicatorsu
Message
—
—
—
—
Continued
81