Bulb
Coupler
Tab
Both sides
3. Push the tab to remove the coupler.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the headlight
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
I n f o r ma t i o n P r o v i d e d b y :
uuReplacing Light BulbsuHeadlight Bulbs
1High Beam Headlight
Holding clip
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Center pin
Insert the clip with the center pin raised, and push
until it is flat.
Continued
Push until the
pin is flat.
489