Honda Accord Hybrid 2015 Quick Reference Manual page 522

■
Distributing the Sealant in the Tire
Speed Restriction Label
Air Only Hose
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
4. Attach the air only hose onto the tire valve
stem. Screw it until it is tight.
5. Turn the selector switch to AIR ONLY.
u Do not turn the air compressor on to
check the pressure.
2 Inflating An Under-inflated Tire P. 523
I n f o r ma t i o n P r o v i d e d b y :
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1Distributing the Sealant in the Tire
WARNING
3
Running the engine with the vehicle in an
enclosed or even partly enclosed area can
cause a rapid build-up of toxic carbon
monoxide.
Breathing this colorless, odorless gas can
cause unconsciousness and even death.
Only run the engine to power the air
compressor with the vehicle outdoors.
Stop and recheck the air pressure after every 10
minutes of driving as necessary until you reach the
nearest service station where you are able to have the
tire permanently repaired or replaced.
Continued 521