Table of Contents
Advertisement
Overriding the child safety device for one cooking session
• Start the hob with
• Touch
the hob.
• When you stop the hob with
OffSound Control (Switching off and on the sounds)
Switching off the sounds
Switch off the appliance.
Touch
for 3 seconds. The displays come on and go out. Touch
on, the appliance is in standard mode. Touch
When the sound is off, you hear only when you touch
Timer come down or when you cover the control panel.
Switching on the sounds
Switch off the appliance.
Touch
for 3 seconds. The displays come on and go out. Touch
on, because the sound is off. Touch
The sound is on.
Helpful hints and tips
Put the cookware on the cross which is on the cooking surface. Cover the cross fully. The
magnetic part of the bottom of the cookware must be 120mm minimum. Induction cooking
zones adapt to the dimension of the bottom of the cookware automatically. You can cook
with the large cookware on two cooking zones at the same time.
Cookware for induction cooking zones
In induction cooking a powerful electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked
as correct by a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if ...
• ... some water boils very quickly on a zone set to the highest heat setting
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
. The symbol
for 4 seconds. Set the heat setting in less than 10 seconds. You can operate
comes on.
, the child safety device operates again.
,
comes on, the sound is off.
,
comes on, the appliance is in standard mode.
Helpful hints and tips
for 3 seconds.
, Minute Minder or Count Down
for 3 seconds.
11
comes
comes
Advertisement
Table of Contents
