Using Your Heater - Insignia NS-HTTCBK6 User Manual

Insignia Ceramic Tower Heater
4 Fit the base onto the threaded piece on the bottom of the heater, then
secure it with the nut you removed previously.
5 Place the heater upright on a stable and level surface.

Using your heater

1 Firmly grab the pull-tab on the remote control battery and pull it to
remove it from the remote control.
2 Make sure that neither the heater nor the power cord has been
damaged in any way during transportation.
3 Place the heater on a firm, level surface, at least three feet (0.9 m) away
from any wall or other objects such, as furniture, curtains, plants, or
combustible material.
4 Fully unwrap the power cord and plug it into a standard wall plug
(120 VAC~60 Hz).
5 Press the
the current room temperature in °F with the °F icon turned on. The
default temperature setting is 77° F and the heater is on low power
with the low power indicator turned on.
If the ambient temperature is 2° lower than the set temperature, the
heater turns on after 10 seconds and remains on until the set
temperature is reached, then the heater, fan, and swing turn off.
Caution
Never leave an operating heater unattended.
power button to turn the heater on. The display shows
www.insigniaproducts.com 9