Table of Contents
Advertisement
6 To change the settings when the heater is turned on, do the following:
To switch between low and
high power setting
To increase or decrease the
temperature setting
To turn the oscillator on to
circulate the heat
To set how long the heater
stays on
7 Press the
When you turn the heater back on, the settings remain the same as
when you turned it off.
Cleaning and maintaining your heater
•
Always remove the plug from the wall socket and allow the heater to
cool before cleaning.
•
Wipe the heater with a soft, damp cloth. Use a mild detergent if
necessary. DO NOT USE solvents or harsh cleaners or you may damage
the finish.
•
Vacuum the grill with your vacuum's brush attachment every few
weeks for optimal performance.
•
If the heater will not be used for an extended period of time, store it in
a dry place.
Safety features
The heater is equipped with double over-heating protection, which
causes the unit to stop operating in the event that the internal
temperature exceeds the normal operating temperature. It also includes
tip-over protection, which turns the heater off in case it is tipped over.
If the heater shuts down:
10
• Press
1. Press
2. Press the + (up) or – (down). The temperature setting changes by
1°C each time you press the button and is shown on the display.
3. Press
room temperature. The heater turns on and stays on until the set
temperature is reached, then the heater, fan, and swing turn off.
• Press
oscillate. Press again to turn it off.
1. Press
SET
2. Press the + (up) or – (down). The timer setting changes by one
hour each time you press the button and is shown on the display.
3. Press
SET
reaches 0, then the heater returns to standby mode.
Note
The display remains bright for one minute after changes are
made, then the display dims. Press any button to return the
display to normal.
power button to turn the heater off (go to standby mode).
www.insigniaproducts.com
Insignia Ceramic Tower Heater
. The high or low power indicator turns on.
twice.
again to confirm. The display returns to the current
. The swing indicator turns on and the heater begins to
. The time indicator turns on.
to confirm. The heater stays on until the set time
Advertisement
Table of Contents
