Assembly - Active Care Medical Spitfire 1310 Owner's Manual

Questions? Call 866.621.4933 or visit www.activecaremed.com.
1. Place the scooter in an area where you have sufficient clearance to move the
parts around. You may need assistance to lift some components.
2. See "Specifications" for individual component weights.
3. No tools are required to disassemble or assemble your scooter. Always
disassemble or assemble your scooter on a level, dry surface with sufficient
space for you to work and move around the scooter. Keep in mind that the
disassembled sections of the scooter take up more floor space than the
assembled scooter.
◊
Caution
Lifting weight beyond your physical capability may result in personal
injury. Ask for assistance when necessary while disassembling or
assembling your scooter.

ASSEMBLY

Note: Raise the tiller before reassembling the scooter.
1. Place the freewheel mode lever in the drive position.
2. Set the rear section in the up position and make sure the hook for the front
section is connected to the axle of the rear section. (See Fig 5.1)
3. Put down the front and rear sections until the scooter is level. (See Fig 5.2)
4. Set down the battery pack on the scooter, and make sure it is in the correct
position.
5. Set down the seat on the seat post until the swivel lock engages and you hear
a click.
6. Turn key switch to "ON". Make sure battery gauge indicates sufficient power.
Spitfire Owner's Manual 11