Making A Call With Voice-Recognition Dialing; Automatically Receiving Incoming Calls - Black Box Voice Magic Plus User Manual

VOICE MAGIC PLUS
5. Wait three seconds, then say the name again to confirm it.
6. You will hear the prompt, "Enter the phone number and press the # key after
you finish."
7. Using the keypad on the Voice Magic Plus remote unit, enter the phone
number for John Smith. If an extension is required, press the * button and
enter the extension number.
8. After you finish entering the phone number, press the # key.
9. Repeat procedures 1 through 8 for each phone contact you want to add.
10. When you are finished, press the End button to exit this mode.
A.4 Making a Call with Voice Recognition Dialing
1. Press the Dial button.
2. You will hear the prompt, "Who would you like to call?"
3. Wait three seconds, then say the name of the phone contact (for example,
"John Smith").
4. You will hear the prompt, "John Smith. Dialing, please hold."
5. The Voice Magic Plus will dial and connect the phone for you automatically.
6. To interrupt and cancel dialing, press Dial again.
A.5 Automatically Receiving Incoming Calls
1. All incoming calls will ring your cellular phone in the normal manner.
2. You will hear the prompt, "David Lee (User's Name), you have a call."
3. You will be connected automatically. Begin your conversation after you hear
the prompt.
4. To hang up, press Dial. If your caller hangs up first, the Voice Magic Plus
hangs up automatically.
Make sure your cellular phone automatic-answer feature is in the "off"
position.
18
NOTE