Setting The User - Black Box Voice Magic Plus User Manual

VOICE MAGIC PLUS
Charging
Light
Microphone

3.3 Setting the User

The Voice Magic Plus accommodates two users, so each memory bank can be
programmed, modified, or erased without affecting the other. By pressing the
setting button, you can switch users.
1. When the Voice Magic Plus's power cable is plugged into the cigarette lighter
and the system is established, you will hear, "Welcome to the Voice Magic Plus
system. Tell me your name?"
2. Wait three seconds, then say your name (for example, "David Lee").
3. You will then hear the confirmation prompt, "Confirm again, David Lee."
4. Wait three seconds and say your name again.
5. The user setting is now complete. You should hear the prompt, "The user is
David Lee."
6. To set up another user, press the User Setting button once. You will hear,
"The phone book is empty." Then follow the procedure above.
10
Infrared
Receiver
Figure 3-1. Installation.
Message
Speaker (on the side of the unit)
Light
Holder
Power
Cable
Remote
Control Unit