Appendix: Quick Reference; Initial Setup; Setting The User; Adding Names And Phone Numbers - Black Box Voice Magic Plus User Manual

Appendix: Quick Reference

A.1 Initial Setup
1. Connect the Voice Magic Plus's phone cable to your cellular phone.
2. Connect the power cable to the Voice Magic Plus and plug the other end of
the cable into the vehicle's cigarette lighter receptacle.
3. Use adhesive tape to secure the microphone/infrared receiver in front of you
on the dashboard.
4. Press the Power switch on your cellular phone to turn it on.
A.2 Setting the User
1. When the Voice Magic Plus's power cable is plugged into the cigarette lighter,
you will hear the prompt, "Welcome to the Voice Dialing System. Tell me
your name?"
2. Wait three seconds, then say your name (for example, "David Lee").
3. You will then hear the confirmation prompt, "Confirm again, David Lee."
4. Wait three seconds, then say your name again.
5. The user setting is now complete. You should hear the prompt, "The user is
David Lee."
A.3 Adding Names and Phone Numbers (Using Your Remote Control Unit)
Prepare a list of the names and phone numbers you want to program
before beginning this process.
1. Press the Add button.
2. You will hear the prompt, "Enter the phone record. Tell me the name."
3. Wait three seconds, then say the name of the first phone contact on your list
(for example, "John Smith").
4. You will hear the confirmation prompt, "Confirm again, John Smith."
APPENDIX: Quick Reference
NOTE
17