Table of Contents
Advertisement
Auto Channel
Scan
Channel
/Frequency
Channel Band-
width
Extension
Sub-Channel
802.11b - if selected, only 802.11b connections are allowed.
802.11g wireless stations will only be able to connect if they are
fully backward-compatible with the 802.11b standard.
802.11g - only 802.11g connections are allowed. If you only have
802.11g, selecting this option may provide a performance im-
provement over using the default setting.
802.11n - only 802.11n connections are allowed. If you only have
802.11n, selecting this option may provide a performance im-
provement over using the default setting.
802.11b and 802.11g - this will allow connections by both
802.11b and 802.11g wireless stations.
802.11n and 802.11g - this will allow connections by both
802.11n and 802.11g wireless stations.
Mixed 802.11n/802.11g/802.11b - this is the default, and will
allow connections by 802.11n, 802.11b and 802.11g wireless sta-
tions.
If "Enable" is selected, the Access Point will select the best available
Channel.
If you experience interference (shown by lost connections and/or slow
data transfers) you may need to experiment with manually setting
different channels to see which is the best.
Select the desired bandwidth from the list.
Select Above or Below Primary Channel from the list.
Access Point Setup
15
Hide quick links:
Advertisement
Table of Contents
