EnGenius EDS1130 Quick Start Manual page 5

B) Select the target Camera from the list.
C) Enter the Username and Password of the Camera on the top right
corner. The default value of both username and password is admin.
D) Click on
to log in.
admin
admin
E) The wizard will guide you to complete Camera Settings step by step.
Network: Set up IP Address, System Time, and Administrator settings.
Note: Please note the DHCP IP given by the Gateway / Router or you
can select the Manual mode to assign a Fixed IP for the Camera.
Cloud Service: You can give an alias for your personal DDNS Domain
that is easy to remember and to share with others in the future.
Config : Set up the video Resolution, Compression Codec, and Maximum
frame rate.
F) Once you finish all the settings in Config page, ensure that
"Check Live View now" is ticked.
Then, click on to check Live View streaming now.