EnGenius EDS1130 Quick Start Manual page 3

1
Connecting to Gateway/Router
You can either set up the camera connectivity using Ethernet cable (option I)
or via Wi-Fi (option II).
Option I - Connecting via Ethernet Cable
A) Plug one end of the Ethernet Cable into the LAN port of your Gateway
/Router and plug the other end of cable into the Ethernet Port of your
Camera.
B) Connect the Power Adapter to your Camera and plug into a wall outlet.
C) Wait for Power LED indicator stop flashing and become solid green. It
may take up to 90 seconds.
A
WAN
B
12V-1A
Reset
C
...
Option II - Connecting via Wi-Fi
A) Connect the Power Adapter to your Camera and plug into a wall outlet.
B) Wait for Power LED indicator stop flashing and become solid green. It
may take up to 90 seconds.
C) Press the WPS button on your Gateway/Router until WPS LED blinks.
A
12V-1A
Reset
C
NOTE: Please make sure your device is equipped with WPS Button.
B
...
WPS
WPS