BEEZ EM-N-600 Instruction Manual page 10

•
Always straighten the power cord before use; do not leave it curled up! If the
power cord is damaged, always ask for professional help!
•
Remove the power cord from the socket before filling the water tank; do not
operate the device with the water tank empty and without the jug, the filter
holder and the tray being in their places!
•
Cleaning and care are important! Remove the power cord from the plug before
cleaning the device. Make sure it has cooled down enough before starting with
the process, using a soft or slightly damp soft cloth. Do not use soap, detergents
or rough cloth.
•
The device can only be repaired by official Service partners; otherwise the
importer takes no responsibility for the consequences.
•
The glass jug was made of tempered glass. However it does not sustain being
exposed to extreme temperature fluctuation. If – for example – one puts it under
cold water, right after hot beverage was poured out of it, it may crack or even
break.
•
If it takes more than usual for water to leave the appliance (if coffee is made
significantly slower), that can be a sign of lime scaling. In this case, remove the
device from power, and leave it to cool down for three hours. Only then can one
open the water tank! Before that, there may be overpressure in the tank, and the
breaking steam or water can cause serious burn damages.
Warranty is conditioned upon proper use!