Power/Invertor Board; Interface Signals - Acer AL1912 Service Manual

POWER/Inverter Board
Description
This specification defined the performance and characteristic of power/inverter board.
It supplies the following outputs :
1). 5Vdc: Logic power.
2). 5Vaudio: Audio power.
3). 15Vinv: Inverter power.
Features
Input Voltage: 100 ~ 240 ±10％Vac
Input current: 1.2Amax. at 90Vac
Input Frequency: 47 ~ 63Hz
Input power saving consumption: Less than 1.2W @ minimum load
Total output power: 60Wmax
Inverter brightness adjustment: Burst mode
Protection function: auto-recovery type

Interface Signals

Input
1. AC Inlet: HUAJIE SA-4S-066 or compatible.
2. J701: SC SCJ-0345-1-X-9 3.6D BLU 3P or compatible.
Output Connector & Pin Assignment:
1. The connecter was pitch 2.0mm, cable length was 125mm.
PIN NO. Function
1 +5Vaudio
2
3
4
5
6
7
8
9
10
Audio power (optional).
GND Audio ground
GND Ground
GND Ground
Vbri Brightness control from logical board (0V to 3.3V)
---- -----
Ven Inverter enable signal from logical board (high active , >3V)
+5Vdc +5Vdc supply for logical board
+5Vdc +5Vdc supply for logical board
+5Vdc +5Vdc supply for logical board
Function
- 25 -