Power/Invertor Board; Interface Signals - Acer AL2416 Service Manual

POWER/Inverter Board
Description
This specification defined the performance and characteristic of power/inverter board.
It supplies the following outputs :
1). 5Vdc: Logic power.
2). 24Vinv: Inverter power.
Features
Input Voltage: 100 ~ 240 ±10％Vac
Input Frequency: 47 ~ 63Hz
Total output power: 110Wmax
Inverter brightness adjustment: Burst mode
Protection function: auto-recovery type

Interface Signals

Input
AC Inlet: HUAJIE SA-4S-066 or compatible.
Output Connector & Pin Assignment:
1.CNS1 (to logic board),type :E&T 4500 or equivalent.
PIN NO. Function
1
2
3
4
5
6
7
8
9
10
11
12
+5Vstb +5Vdc for standby output
GND Power Ground
GND Power Ground
GND Power Ground
+5Vcc +5Vdc, connected to main board
+5Vcc +5Vdc, connected to main board
+5Vcc +5Vdc, connected to main board
+12Vcc Audio power (N/A option)
GND Signal ground
Power on (24V/5Vcc)Enable signal , Active : 2V~5V, off<1V
Backlight Backlight On/Off control signal, connected to CNS3#12
on/off
Dimmer Brightness control, connected to CN3#13,bright
max.=3.3V,min.=0V.
Function
- 29 -