Download  Print this page

Acer AL1917T User Manual

Tft lcd monitor
Hide thumbs

Advertisement

Quick Links

TABLE OF CONTENTS

Special notes on LCD monitors................................................................1
Introduction .............................................................................................2
Features ..................................................................................................2
Unpacking ...............................................................................................3
Attaching/Removing the base ..................................................................4
Screen position adjustment.......................................................................4
Connecting the power cord ......................................................................5
Safety precaution ....................................................................................5
Cleaning your monitor ..............................................................................5
Preset modes ..........................................................................................6
Power saving ..........................................................................................7
DDC .......................................................................................................7
Installation ...............................................................................................8
User controls ...........................................................................................9
Troubleshooting ..................................................................................... 13
Specification .......................................................................................... 14

Advertisement

loading

  Related Manuals for Acer AL1917T

  Summary of Contents for Acer AL1917T

  • Page 1: Table Of Contents

    TABLE OF CONTENTS Special notes on LCD monitors...1 Introduction ...2 Features ...2 Unpacking ...3 Attaching/Removing the base ...4 Screen position adjustment...4 Connecting the power cord ...5 Safety precaution ...5 Cleaning your monitor ...5 Preset modes ...6 Power saving ...7 DDC ...7 Installation ...8 User controls ...9 Troubleshooting ...
  • Page 2: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. ·...
  • Page 3: Introduction

    INTRODUCTION Congratulations for purchasing model AL1917, a high performance 19-inch color TFT LCD monitor. The AL1917 monitor provides flicker-free and color images at optional resolutions. Through this user guide, we will introduce you step-by-step all the features, functions and technical specifications of the LCD monitor. Surely you will have a refreshing experience working with the monitor.
  • Page 4: Unpacking

    UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · LCD Monitor · 15-pin D-Sub Cable · User Manual Speakers ·...
  • Page 5: Attaching/Removing The Base

    Attaching / Removing the Base Install: Align the four hooks on the bottom of the monitor with the corresponding slots on the bottom of the base. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.
  • Page 6: Connecting The Power Cord

    CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. ·...
  • Page 7: Preset Modes

    PRESET MODES To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern. If the mode in use does not match one of the defaults, the user can store their preferred modes in the user modes.
  • Page 8: Power Saving

    AL1917 POWER SAVING The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. Power State LED Light Consumption Normal Green Active < 3 W Amber The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated.
  • Page 9: Installation

    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the video cable to the computer. c. (only Dual-Input Model) Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.
  • Page 10: User Controls

    AL1917 USER CONTROLS Front Panel Controls 1. Power Switch: To turn ON or OFF the power. 2. Power LED: Lights up to indicate the power is turned ON. 3. Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
  • Page 11: Adjusting The Picture

    HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5.
  • Page 12 Main Menu Menu Sub Menu Item Icon Icon H. Position V. Position Warm Cool User /Red User/Green User/Blue English Deutsch Francais Espanol Italiano Description Adjust the horizontal position. (available in Analog mode only) Adjust the vertical position. (available in Analog mode only) Set the color temperature to warm white.
  • Page 13 Main Menu Menu Sub Menu Item Icon Icon H. Position V. Position OSD Timeout (Only Auto Config Analog Input Model) Analog (Only Dual Input Digital Model) Information Reset Exit Description Adjust the horizontal position of the OSD. Adjust the vertical position of the OSD. Adjust the OSD timeout.
  • Page 14: Troubleshooting

    TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problems Current Status LED ON LED OFF Picture LED displays amber color Unstable Picture Display is missing, center shift, or too small or too large Abnormal in display size...
  • Page 15: Specification

    SPECIFICATION Driving system Size Pixel pitch LCD Panel Brightness Contrast Viewable angle Response time Video H-Frequency V-Frequency Display Colors Dot Clock Max. Resolution Plug & Play ON Mode EPA ENERGY STAR OFF Mode Input Connector Input Video Signal Maximum Screen Size Power Source TFT Color LCD 48.26cm(19.0")
  • Page 16 Environmental Considerations Dimensions Weight (N. W.) Switch External Controls: Functions Power Consumption ( Maximum ) Audio Output Regulatory Compliance * All specifications are subject to change without notice. Operating Temp: 5 to 35 Storage Temp.: -20 to 60 Operating Humidity: 10% to 85% 411(W) x 410(H) x 181(D)mm 4kg Unit (net) Auto Adjust Key...

This manual is also suitable for:

Al1917Al1917cbmdAl1917wEt.1917b.0dc