AT&T EP5632 User Manual page 36

System setup
Settings
Edit Handset Name
Show Handset Name
Show Handset Name
Keypad Tone
Language
LCD Contrast
Show Handset Name
POn
Off
SET
Keypad Tone
POn
Off
SET
Language
PEnglish
Español
Français
SET
Show Handset Name
By default, the handset name is shown on the
display when in idle mode.
To change this setting:
1. Press MENU/
main menu.
2. Press the UP or DOWN Navkeys to select
Settings, then press
Settings menu.
3. Press the UP and DOWN NavKeys to highlight
Show Handset Name, then press
4. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or
SELECT to save the setting.
NOTE: If you change this setting to off, it will only affect that
handset.
Keypad Tone
By default, the handset beeps when you press a key.
To change the keypad tone setting:
1. Follow steps 1 and 2 in the above section.
2. Press the UP and DOWN NavKeys to highlight
Keypad Tone, then press
3. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or
SELECT to save the setting.
Language
By default, the handset language is English. You
can select English, Spanish, or French to be used in
all screen displays.
To change the language setting:
1. Follow step 1 and 2 in the top section.
2. Press the UP and DOWN NavKeys to highlight
Language, then press
3. Press the UP and DOWN NavKeys to highlight
English, Español or Français, then press the SET
softkey or
MENU
32
in idle mode to enter the
SELECT
/SELECT to enter the
MENU
MENU
/SELECT.
MENU
/SELECT to save the setting.
/SELECT.
MENU
MENU
/SELECT.
MENU
/
/