Wheel Removal; Wheel Installation - Polaris 2016 RANGER EV Li-Ion Owner's Manual

MAINTENANCE
Tires

Wheel Removal

1. Apply the brakes. Set the park brake. Turn the key off.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the frame.
4. Remove the wheel nuts and washers. Remove the wheel.

Wheel Installation

1. Set the park brake. Place the wheel in the correct position on the wheel hub. Be sure the
valve stem is toward the outside and rotation arrows on the tire point toward forward
rotation.
WARNING! Improperly installed wheels can adversely affect tire wear and vehicle handling, which can
result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service
axle nuts that have a cotter pin installed. Your POLARIS dealer can assist.
2. Attach the wheel nuts and washers and finger tighten.
3. Carefully lower the vehicle to the ground.
4. Torque the wheel nuts to specification. See page 61.
62