Advertisement
PROCEDURE D - REGENERATION OF RESIN IN BOTTOM CHAMBER
Follow manufacturers' instructions for regeneration of media. Cation exchange resin
may be regenerated in the following manner.
1.
3.
Clamp inlet
tube.
5.
Unclamp inlet
tube and allow salt
solution to run to
waste.
7.
9.
At this point the resin in the bottom chamber should be
completely regenerated.
Prepare salt
solution by
dissolving
about ½ pound
of salt (sodium
chloride) in 1
quart of water.
Add salt
solution until
softener is
completely
full.
Attach adapter
to faucet.
2.
4.
Prop up the softener. Allow to
stand for about 30 minutes.
6.
8.
Wash resin with
approximately 1
gallon of tap
water.
Turn
softener
upside down
and remove
black plug
from bottom
of softener.
Clean
threaded area
completely
and replace
black plug in
bottom of
softener.
Advertisement
