Advertisement
Quick Links
INTRODUCTION
The DuoSoft Water Softener is designed to produce high quality treated water. Each
unit has a faucet adapter that easily connects to any standard faucet. The two chambers
may be filled with the media of choice for specific problem water. Water passes through
both chambers and is treated by both types of media.
READ ALL INSTRUCTIONS BEFORE USE.
NOTE: This softener DOES NOT yield water suitable for drinking.
OUTLET
HOSE
DUO-SOFT
INLET
HOSE
CLAMP
WATER SOFTENER
TM
CODE 1022
CLAMP
PLUG
CHAMBER
CHAMBER
FAUCET
ADAPTER
Advertisement
Related Manuals for LaMotte duo-soft 1022
Summary of Contents for LaMotte duo-soft 1022
- Page 1 DUO-SOFT WATER SOFTENER CODE 1022 INTRODUCTION The DuoSoft Water Softener is designed to produce high quality treated water. Each unit has a faucet adapter that easily connects to any standard faucet. The two chambers may be filled with the media of choice for specific problem water. Water passes through both chambers and is treated by both types of media.
- Page 3 ROCEDURE A - ADDITION AND REMOVAL OF RESIN With the aid of a funnel, Tap water may add the fresh resin to the be added to the column. resin in the funnel to facilitate filling of the column. Continue adding resin to the column until the resin is Allow excess about 2"...
- Page 4 PROCEDURE B - INSTRUCTIONS FOR USE Attach adapter Allow water to on inlet hose to run from faucet faucet. Fully briefly to visually open clamp on gauge pressure. inlet hose. SLOWLY turn on faucet and adjust the flow of water into Fill chamber softener until the until a 1"...
- Page 5 PROCEDURE C - REGENERATION OF RESIN IN TOP CHAMBER Follow manufacturers’ insstructions for regeneration of media. Cation exchange resin may be regenerated in the following manner. NOTE: Due to build up of air pressure, it is not possible to regenerate both chambers at the same time. Follow steps 1-8 to regenerate top chamber, then procedure D to regenerate bottom chamber.
- Page 6 PROCEDURE D - REGENERATION OF RESIN IN BOTTOM CHAMBER Follow manufacturers’ instructions for regeneration of media. Cation exchange resin may be regenerated in the following manner. Prepare salt Turn solution by softener dissolving upside down about ½ pound and remove of salt (sodium black plug chloride) in 1...
- Page 8 LaMOTTE COMPANY Helping People Solve Analytical Challenges ® PO Box 329 • Chestertown • Maryland • 21620 • USA 800-344-3100 • 410-778-3100 (Outside U.S.A.) • Fax 410-778-6394 Visit us on the web at www.lamotte.com 61022-07.05...