Nokia 770 Service Manual page 13

CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
9.) Use a clean cloth when opening the A-Cover and B-
Cover.
11.) Remove the Keymat Front and the Keymat Top.
Display Module needs to be supported all the time
when turning over the device!
13.) Remove the Frame Assy with the Engine Module
and the Display Module from the B-Cover.
15.) Release the Flex of the Display using a slotted
screwdriver.
Service Manual xxxx Level 1&2
PAGE 13 (22)
CONFIDENTIAL
10.) Remove the A-Cover Assy by twisting it from the
Fastening Cover.
12.) Release the clips of the Battery Holder carefully.
Note! It is not allowed to bend the Battery Holder
Metals.
14.) Unplug the Display Connector carefully with the
SRT-6.
16.) Unplug the Keymat Flex Connector carefully by
using the SRT-6.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
29.9.2005