Playing Audio Via Aux In; Using Color Modes - iHome iBT70 Instruction Manual

Playing Audio via Aux In

1. Connect micro USB charging/audio cable to the Charging/Aux-in USB Port
on the side of the unit and connect the 3.5mm audio plug end to the
headphone or line-out jack on your audio device.
2. Slide the Power On/Off Switch to ON turn the unit ON.
3. Power on the audio device and use the controls on the device to play or pause
audio and to navigate tracks.
4. Press the – or + Button to adjust the system volume. You can also adjust
volume on your device.
5. When done listening, slide the Power On/Off Switch to OFF turn the unit OFF.
Remember to turn off your device, too.

Using Color Modes

There are six color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next
c. One Color (select a favorite color)
e. Preset Pulsing (each light array pulses through its own preset pattern of colors)
f. Off (no display)
1. Slide the Power On/Off Switch to ON turn the unit ON.
2. Press the Color Mode Button repeatedly to cycle to the desired color mode. For One Color mode, first cycle
to Fast Change mode and press the Color Mode Button when the desired color appears. For Pulse to Music,
make sure the volume on your connected Bluetooth device is above 30%.
3. When done, slide the Power On/Off Switch to OFF turn the unit OFF.
b. Fast Change (colors change rapidly)
d. Pulse to Music (lights flash to the beat of the music)
7
Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4