Table of Contents
Advertisement
Quick Links
Water Purifier, Auto Still
Model
WS 200/220
Instruction Manual
- First Edition -
Thank you for purchasing " Auto Still, WS
Series" of Yamato Scientific Co., Ltd.
To use this unit properly, read this "Instruction
Manual" thoroughly before using this unit.
Keep this instruction manual around this unit
for referring at anytime.
WARNING!:
Carefully read and thoroughly understand the
important warning items described in this
manual before using this unit.
Yamato Scientific Co. LTD.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yamato WS 200
Summary of Contents for Yamato WS 200
- Page 1 Instruction Manual - First Edition - Thank you for purchasing " Auto Still, WS Series" of Yamato Scientific Co., Ltd. To use this unit properly, read this "Instruction Manual" thoroughly before using this unit. Keep this instruction manual around this unit for referring at anytime.
-
Page 3: Table Of Contents
Contents Cautions in Using with Safety..............1 • Explanation........................1 • Table of Illustrated Symbols ..................2 • Fundamental Matters of “WARNING!” and “CAUTION!” ..........3 Before Using this unit ................4 • Requirements for Installation..................4 Description and Function of Each Part ..........7 •... -
Page 5: Cautions In Using With Safety
Cautions in Using with Safety Explanation MEANING OF ILLUSTRATED SYMBOLS Illustrated Symbols Various symbols are used in this safety manual in order to use the unit without danger of injury and damage of the unit. A list of problems caused by ignoring the warnings and improper handling is divided as shown below.Be sure that you understand the warnings and cautions in this manual before operating the unit. -
Page 6: Table Of Illustrated Symbols
Cautions in Using with Safety Table of Illustrated Symbols Warning Warning, Warning, Warning, Warning, Warning, generally high voltage high temperature drive train explosive Caution Caution, Caution, Caution, Caution, Caution, generally electrical shock scald no road heating not to drench Caution, Caution, water only deadly poison... -
Page 7: Fundamental Matters Of "Warning!" And "Caution
Cautions in Using with Safety Fundamental Matters of “WARNING!” and “CAUTION!” WARNING! Do not use this unit in an area where there is flammable or explosive gas Never use this unit in an area where there is flammable or explosive gas. This unit is not explosion-proof. -
Page 8: Before Using This Unit
Before Using this unit Requirements for Installation WARNING! 1. Always ground this unit • Connect the power plug to a receptacle with grounding connectors. • Do not forget to ground this unit, to protect you and the unit from electrical shock in case of power surge. - Page 9 Before Using this unit Requirements for Installation 3. Do not use this unit in an area where there is flammable or explosive gas • Never use this unit in an area where there is flammable or explosive gas. This unit is not explosion-proof.
- Page 10 Before Using this unit Requirements for Installation CAUTION! 6. Choose a correct power distribution board or receptacle • Choose a correct power distribution board or receptacle that meets the unit’s rated electric capacity. Electric capacity: WS200: AC100 V, 15A WS220: AC100 V, 15A NOTE) There could be the case that the unit does not run even after turning ON the power.
-
Page 11: Description And Function Of Each Part
Description and Function of Each Part Main Unit WS200 Micro switch Condenser Heater Bimetal thermostat Tank Boiler Float switch Fixed flow rate valve Float tube Solenoid valve Water supply port Boiler drain cock Water cock Production plate (Right side of the unit) Drain port Power switch (Earth leakage breaker) - Page 12 Description and Function of Each Part Main Unit WS220 Condenser Micro switch Bimetal thermostat Heater Tank Boiler Float switch Fixed flow rate valve Float tube Solenoid valve Water supply port Boiler drain cock Water cock Production plate (Right side of the unit) Drain port Power switch (Earth leakage breaker)
-
Page 13: Control Panel
Description and Function of Each Part Control Panel POWER POWER DISTILL FULL LEVEL ALARM ① ④ ③ ⑤ ② Power switch shared by the earth leakage breaker. If the ① Power switch： lever is raised, it is ON. POWER (green): Goes ON when the power switch is ON. ②... -
Page 14: Piping System View
Description and Function of Each Part Piping System View WS200 ⑩ Water supply Water drain WS220 Sampling ① Water supply port ⑨ Heater ② Solenoid valve ⑩ Heater integument pipe ③ Fixed flow rate valve ⑪ Boiler ④ Micro switch (Heater control) ⑫... -
Page 15: Installation/Operation Method
Installation/Operation Method Connecting the Water Supply Hose Set the main unit at a level and stable place near the tap and sink. Keep the space of about 20cm or more in the both sides, over and back of the main unit for radiation. Take out the accessories such as the water supply hose and water drain hose from the packaging material in the bottom. -
Page 16: Connecting The Drain Hose
Installation/Operation Method Connecting the Drain Hose 1. Remove the rubber plug from the outlet of the water drain port ②. 2. Route the water drain hose ⑤, and insert it into the water drain port ②. Then tighten them ② with the attached hose band ⑥... -
Page 17: Handling Precautions
Handling Precautions WARNING! If a problem occurs If smoke or strange odor should come out of this unit for some reason, turn off the power key right away, and then turn off the circuit breaker and the main power. Immediately contact a service technician for inspection. - Page 18 Handling Precautions CAUTION! Prevention of freezing If it is necessary to use this unit at a cold place in winter, and if the pipe or the water in the boiler could freeze, install an electric lamp (100 - 200W) in the armor of the main unit to prevent freezing.
-
Page 19: Maintenance Method
Maintenance Method Daily Inspection and Maintenance For the safety use of this unit, please perform the daily inspection and maintenance without fail. Since this unit distills the city water directly, scale is deposited in the boiler extremely. Therefore, maintenance and checks are mainly planned to remove such boiler scale. Reference for maintenance Maintenance/check items Reference for timing... -
Page 20: Washing Distiller
Maintenance Method Washing Distiller 1. Water Drained from Boiler Water in the boiler is condensed as the distillation continues, thus promoting the deposition of boiler scale. To prevent this, open the front door once or twice daily (after every 5 - 8 hours of distillation), and drain water via the boiler water drain cock in the front. - Page 21 Maintenance Method Washing Distiller ⑫ ⑦ ⑥ ⑦ ⑧ ⑪ ⑤ WS200 ① Boiler ⑥ ② Packing ③ ③ Boiler cover ④ Heater ⑤ ⑤ Heater nut ⑥ Setting plate ② ⑦ Screw nut ④ ⑧ Teflon tube ⑫ ⑨ Boiler drain port ⑩...
-
Page 22: Washing Method
Maintenance Method Washing Method 1. Adjustment of Washing Solution Prepare about 2 liters of hot water at 50 - 60 ℃ for WS200, and about 1.5 liters for WS220. Add about 200 g (WS200) or 150 g (WS220) of the attached scale-washing agent to this hot water, and stir thoroughly (standard: 8 - 10%). -
Page 23: Replacement Of Hose
Sleeve Fig. 6 2. Replacement of Hose Be sure to use the replacement hoses specified by Yamato Scientific. Replace the pressure-resistant hoses (black and milky white hoses) used in the unit in the following procedure: 1. Remove the cap nut, and pull off the hose from the connector. -
Page 24: Replacement Of Heater
Maintenance Method Replacement of Heater 1. WS200 (See Fig. 5 in Page 17) 1. Turn OFF the power switch. 2. Open the front door. 3. Open the manual cock, and drain water from the boiler. According to Page 16 "Washing Distiller" remove the heater of WS200 along with the distiller (boiler ①... -
Page 25: Long Storage And Disposal
Long storage and disposal When not using this unit for long term / When disposing CAUTION! When not using this unit for long term… • Turn off the power and disconnect the power cord. WARNING! When disposing… • Keep out of reach of children. •... -
Page 26: In The Event Of Failure
We recommend for you to turn off the switch of device if a power failure occurs during operation. In the case if the error other than listed above occurred, turn off the power switch and primary power source immediately. Contact the shop of your purchase or nearest Yamato Scientific Service Office. -
Page 27: After Service And Warranty
In Case of Request for Repair If the failure occurs, stop the operation, turn OFF the power switch, and unplug the power plug. Please contact the sales agency that this unit was purchased, or the Yamato Scientific's sales office. < Check following items before contact >... -
Page 28: Specification
Specification Model WS200 WS220 Collecting method Distillation Performance Sampled pure water Distilled water Quantity of distilled water Approx. 1.8L/h Boiler Stainless steel (SUS 304) Super hard glass Condenser Super hard glass Distiller Configuration Set in quartz glass Heater Pipe heater integument pipe Distilled water storage tank Made of polyethylene, 20L... -
Page 29: Wiring Diagram
Wiring Diagram Symbol Part name Symbol Part name Earth leakage breaker Relay (for heater) Power lamp Relay (for water level of tank) Distill lamp Micro switch (for water level of boiler) Alarm lamp Float switch Full level lamp Water supply solenoid valve Bimetal thermostat Heater... -
Page 30: Replacement Parts Table
Organo Bimetal thermostat WA33000110 Fuji Controls TH-53F580FS 110℃ Relay 2050080002 AP3124K Matsushita WS200 Float tube WS200-30130 Super hard glass Yamato Scientific Boiler 253045-146 SUS304 Yamato Scientific Heater 253045-149 1.5KW AC100V Yamato Scientific Packing (for boiler) 253045-150 Silicon Yamato Scientific WS220... -
Page 31: Reference
Reference List of Dangerous Substances Never use explosive substances, flammable substances and substances that include explosive or flammable ingredients in this unit. EXPLOSIVE Ethylene glycol dinitrate (nitro glycol), Glycerin trinitrate (nitroglycerine), Cellulose nitrate (nitrocellulose), and other explosive nitrate esters Trinitrobenzene, Trinitrotoluene, Trinitrophenol (picric acid), and other explosive EXPLOSIVE: nitro compounds Acetyl hidroperoxide (peracetic acid), Methyl ethyl ketone peroxide, Benzyl... - Page 32 Responsibility Please follow the instructions in this document when using this unit. Yamato Scientific has no responsibility for the accidents or breakdown of device if it is used with a failure to comply. Never conduct what this document forbids. Unexpected accidents or breakdown may result in.
Need help?
Do you have a question about the WS 200 and is the answer not in the manual?
Questions and answers