Adjusting Ring And Volume; Privacy Setting; Section 7: Maintenance; Section 8: Trouble Shooting Guide - Yale JB-304VCT User Manual

6.11 Adjusting ring and volume

Push button and do not release it until the indoor phone rings. At this moment users may push
again and again to choose the rings. The choice will be accepted once the indoor phone shuts automatically or the
users may push button. While adjusting it, users may push
ring volume. There are 8 levels. The levels will turn to next one by one. The setting will quit itself if no operation
within 10 seconds. User also may push
6.12 Privacy settings
At the standby status, push M button and do not release it for 2 seconds. The indoor phone will get ready for
the privacy with a double beeps.
Actions of push any button or answering a call, or the timeout (12 hours) will make the setting invalid.
7. Maintenance
7.1 Please use only the Power plug adapter provided in the kit.
7.2 Do not insert the power adapter into the power socket before installation. Take the power adapter out from
the power socket when you choose not to use the system.
7.3 To avoid product damage due to wrong connection, please pay attention to the colors of the wire and
connector cable coloring while wiring the system.
7.4 Make sure that Outdoor Station and Indoor Phone are mounted properly. The Outdoor Station should be
protected from rain, water and direct strong sunlight.
7.5 Handle the function buttons gently.
7.6 Do not pull any connected wires while system is powered ON. Please pull the connectors gently to avoid
damage on connector terminals once the system is powered off.
7.7 Keep the machine clean. Protect the lens and microphones from being blocked by dust.
8. Trouble Shooting Guide

8.1 Test

After all components are installed and connected as the user's manual, please switch the power on and then try
to operate all features on all door stations and indoor phones.
button to confirm the setting and exit immediately.
14
button again and again to increase/decrease the
button