Quick Reference - Sylvania SCR1053 Instruction Manual

QUICK REFERENCE

1 SOURCE / AL OFF Button
Use this button to turn on or turn off the unit.
When the unit is on, use this button to select FM or AM mode
When the alarm activates, use this button to turn the alarm off.
2 CLK / MEM Button
In CLOCK mode, use this button to set the clock time
In Radio mode, use this button to store radio stations in the memory.
In Radio mode, use this button to select the stored radio stations in the
memory
3 SNOOZE / SLEEP Button
When alarm activates, use to button to temporarily suspend the ALARM for
period.
Use this button to set the SLEEP timer between 10 and 90 minutes in 10
decrements..
4 MIN / Button
In radio mode, use this button to search the radio station in forward direction.
In clock mode, use this button to adjust the minute in CLOCK or ALARM
5 HOUR / Button
In radio mode, use this button to search the radio station in backward
In clock mode, use this button to adjust the hour in CLOCK or ALARM time.
6 DIMMER Button
Use this button to select brightness of the display.
7 AL2 / VOL− Button
In clock mode, use this button to set the alarm time in ALARM2
In radio mode, use this button to decrease the volume.
8 AL1 / VOL+ Button
In clock mode, use this button to set the alarm time in ALARM1
In radio mode, use this button to increase the volume.
9 LED Display
Display for the CLOCK and RADIO frequency..
10 ALARM1 BUZZER Indicator
This indicator shows that the unit is set in ALARM 1 buzzer mode.
11 ALARM1 RADIO Indicator
This indicator shows that the unit is set in ALARM1 radio mode.
12 ALARM2 BUZZER Indicator
This indicator shows that the unit is set in ALARM2 buzzer mode.
13 ALARM2 RADIO Indicator
This indicator shows that the unit is set in ALARM2 radio mode.
14 PM Indicator
This indicator shows that the time display is PM
15 BATTERY Compartment
Compartment for the back-up battery.
16 DC Jack
Connect the unit to the AC-DC adaptor.
17 FM Wire Antenna
Extent this wire antenna to obtain better FM broadcasting.
18 SPEAKER
Sound output