Table of Contents
Advertisement
3
3
When digital input (optical or coaxial) is selected, this
•
receiver can only play back Dolby Digital, PCM (32 kHz to
96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal
formats. The compatible signals via the HDMI terminals
are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM
(32 kHz to 192 kHz sampling frequencies), Dolby TrueHD,
Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio
and DVD Audio (including 192 kHz). With other digital
signal formats, set to A (analog).
You may get digital noise when a LD or CD player
•
compatible with DTS is playing an analog signal. To prevent
noise, make the proper digital connections
set the signal input to C1/O1 (digital).
Some DVD players don't output DTS signals. For more
•
details, refer to the instruction manual supplied with your
DVD player.
Input
Input Terminals
function
HDMI
COAXIAL
OPTICAL
BD
DVD
TV
a
SAT/CBL
CD
GAME
The HDMI terminals can be used for the TV input by
a.
turning ON the ARC function in the HDMI setting
(page
29).
In order to listen to the audio from the TV that is connected
b.
to this receiver using a analog audio cables, set-up for
analog audio input is required (see
The Input Assign menu
on page
28).
Tip
In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.
•
Video/Audio (HDMI)
DVD
(page
13) and
ANALOG
b
TUNER
BD
SAT/CBL GAME
Audio
DVD SAT/CBL
Audio
Video
CD
TV
SAT/CBL
DVD
19
Audio
(TV input)
1.
TV
2.
Other than TV input
AUDIO SEL
Audio
DVD
CD
AUDIO SEL
A
AUDIO SEL
(CD) audio input terminal is
assigned to CD under factory
settings. If you want to
change this to TV input,
please change the settings in
the Input Assign menu
AUDIO SEL
(page
28).
A
Basic playback
4
6
30
O1
SAT/CBL
TV
C1
Hide quick links:
Advertisement
Table of Contents
