Download Print this page

Milwaukee 49-24-0145 Operator's Manual page 3

Milwaukee tools work light user manual
Hide thumbs Also See for 49-24-0145:

Advertisement

MAINTENANCE
WARNING
To reduce the
risk of injury, always unplug the charger and
remove the battery pack from the charger
or tool before performing any maintenance.
Never disassemble the tool, battery pack or
charger. Contact a MILWAUKEE service facility
for ALL repairs.
Maintain Work Light
Keep your work light, battery pack and charger in
good repair by adopting a regular maintenance
program. If the work light does not work properly,
return the work light to a MILWAUKEE service facil-
ity for repairs.
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery
charger) is warranted to the original purchaser only to be
free from defects in material and workmanship. Subject
to certain exceptions, MILWAUKEE will repair or replace
any part on a electric power tool which, after examination,
is determined by MILWAUKEE to be defective in material
or workmanship for a period of fi ve (5) years* after the
date of purchase. Return the electric power tool and
a copy of proof of purchase to a MILWAUKEE factory
Service/Sales Support Branch location or MILWAUKEE
Authorized Service Station, freight prepaid and insured,
are requested for this warranty to be effective. This
warranty does not apply to damage that MILWAUKEE
determines to be from repairs made or attempted by
anyone other than MILWAUKEE authorized personnel,
misuse, alterations, abuse, normal wear and tear, lack
of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, &
electric chain hoists), all Ni-CD battery packs, Work Lights
(cordless fl ashlights), Job Site Radios, and Trade Titan™
Industrial Work Carts is one (1) year from the date of pur-
chase. *The warranty period for Li-Ion battery packs that
do not contain V™-technology – 4.0 volts through 18.0
volts - is two (2) years from the date of purchase.
*There is a separate warranty for V™-technology Li-Ion
Battery Packs V™18 volts and above that accompany
V™-technology cordless power tools:
*Every MILWAUKEE V™-technology Li-Ion Battery Pack
18 volts or above is covered by an initial 1000 Charges/2
Years free replacement warranty. This means that for
the earlier of the fi rst 1000 charges or two (2) years from
the date of purchase/fi rst charge, a replacement battery
will be provided to the customer for any defective battery
free of charge. Thereafter, customers will also receive an
additional warranty on a pro rata basis up to the earlier of
the fi rst 2000 charges or fi ve (5) Years from the date of
purchase/fi rst charge. This means that every customer
gets an additional 1000 charges or three (3) years of pro
rata warranty on the V™-technology Li-Ion Battery Pack
WARNING
To reduce the risk
of personal injury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to fl ow inside them.
Cleaning
Keep tool handles clean, dry and free of oil or grease.
Use only mild soap and a damp cloth to clean the
tool, battery pack and charger since certain cleaning
agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use fl ammable or
combustible solvents around tools.
18 volts or above depending upon the amount of use.
During this additional warranty period, the customer pays
for only the useable service received over and above the
fi rst 1000 Charges/2 years, based on the date of fi rst
charge and number of charges found on the battery pack
via Milwaukee's V™-technology Service Reader.
Warranty Registration is not necessary to obtain the ap-
plicable warranty on a MILWAUKEE product. The manu-
facturing date of the product will be used to determine the
warranty period if no proof of purchase is provided at the
time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND
REPLACEMENT REMEDIES DESCRIBED HEREIN
IS A CONDITION OF THE CONTRACT FOR THE
PURCHASE OF EVERY MILWAUKEE PRODUCT. IF
YOU DO NOT AGREE TO THIS CONDITION, YOU
SHOULD NOT PURCHASE THE PRODUCT. IN NO
EVENT SHALL MILWAUKEE BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNI-
TIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY
FEES, EXPENSES, LOSSES OR DELAYS ALLEGED
TO BE AS A CONSEQUENCE OF ANY DAMAGE
TO, FAILURE OF, OR DEFECT IN ANY PRODUCT
INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS
FOR LOSS OF PROFITS. THIS WARRANTY IS EX-
CLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED
OR IMPLIED. WITHOUT LIMITING THE GENERALITY
OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE OR PURPOSE,
AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A.,
Canada and Mexico only.
Please consult the 'Service Center Search' in the Parts &
Service section of MILWAUKEE's website www.milwau-
keetool.com or call 1.800.SAWDUST (1.800.729.3878) to
locate your nearest service facility for warranty and non-
warranty service on a MILWAUKEE electric power tool.
4
RÈGLES IMPORTANTES DE SÉCURITÉ
AVERTISSEMENT
TOUTES LES INSTRUCTIONS
Lors de l'utilisation d'outils électriques, toujours suivre
les consignes de base, notamment :
Avant d'utiliser le lampe de travil, lire ce manuel de l'opérateur, le manuel de l'opérateur de la batterie
et du chargeur, et toutes les étiquettes de la batterie, du chargeur et de le lampe de travil.
• Lire toutes les instructions avant d'utiliser
l'appareil.
• Pour réduire les risques de blessures, porter
une attention particulière lorsque le produit est
utilisé en présence d'enfants.
• Ne pas utiliser cet outil à l'extérieur. Ne pas
utiliser cet outil à l'extérieur.
• S'il s'agit d'un outil rechargeable, utiliser
exclusivement le chargeur fourni par le fabricant
afi n de le recharger.
• Si l'outil est doté d'une lampe à ampoule
amovible, toujours débrancher l'outil avant de
remplacer l'ampoule. Consulter la section «
Spécifi cations » pour obtenir des renseignements
sur les ampoules de rechange.
• Familiarisez-vous avec votre lampe de travil.
Lisez attentivement ce manuel pour apprendre
les applications, limitations et risques inhérents
au maniement de ce genre d'outil.
• Doit être rechargée seulement avec le char-
geur spécifi é pour la pile. Un chargeur adapté
à un certain type de pile peut créer un risque
d'incendie s'il est utilisé avec d'autres piles.
• N'utiliser la lampe arisez-vous avec votre
lampe de travil sans fi l qu'avec le bloc de
piles spécifi é. L'utilisation de toute autre pile
peut créer un risque d'incendie.
• Lorsque le bloc-batterie n'est pas en service,
tenez-le à l'écart d'autres objets métalliques
(trombones, pièces de monnaie, clés, clous,
vis, etc.) susceptibles d'établir un contact
électrique entre les deux bornes. La mise
Pictographie
Tension CD seul
Underwriters Laboratories, Inc.
Spécifi cations
No de Cat.
Volts CD
L'ampoule de rechange
49-24-0171
18
49-81-0030
49-24-0145
12
49-81-0020
VOUS DEVEZ LIRE ET COMPRENDRE
en court-circuit des bornes de la batterie peut
produire des étincelles et constitue un risque de
brûlures ou d'incendie.
• N'insérez jamais dans la douille pour ampoule
des ampoules autres que celles de MILWAU-
KEE. L'insertion d'ampoules d'une autre marque
que MILWAUKEE peut entraîner un court-circuit
de la pile et des blessures.
• Avertissement – La lentille devient très
chaude pendant l'utilisation. Pour réduire les
risques de brûlures, ne pas toucher à la lentille
si celle-ci est chaude.
• Rangez la lampe de tavail hors de laportée des
enfants. Chauffer les lumières de travail peuvent
devenir hasardeuses dans les mains d'enfants.
• Entretenez les étiquettes et marques du fab-
ricant. Les indications qu'elles contiennent sont
précieuses. Si elles deviennent illisibles ou se
détachent, faites-les remplacer gratuitement à
un centre de service MILWAUKEE accrédité.
CONSERVEZ CES
INSTRUCTIONS
DESCRIPTION FONCTIONNELLE
1. Ensemble collet
1
2. Bouton «On/Off»
(Marche/Arrêt)
5
3. Aimant
4
4. Crochet
1
2
5. Tête pivotante
Pour l'usage avec des Batteries:
48-11-1815, 48-11-1828 18 V Li-Ion ou équivalent
48-11-2401 12 V Li-Ion ou équivalent
5
5
3
2

Advertisement

loading

This manual is also suitable for:

49-24-0171