Generac Power Systems GTV-990 Manual page 39

Figure 6-8.
SUPPLIED BY
CUSTOMER
SUPPLIED BY
CUSTOMER
BATTERY
OPTIONAL HIGH TEMP. SWITCH
CONNECT TO IGNITION KILL WIRE TO
KILL IGNITION ON HIGH TEMPERATURE.
CONNECT TO GROUND SIDE OF A LIGHT
OR BUZZER TO GROUND THE CIRCUIT
AND TURN THE LIGHT OR BUZZER ON
WHEN THERE IS HIGH TEMPERATURE.
SUPPLIED BY CUSTOMER
CONNECT TO IGNITION KILL WIRE TO KILL
IGNITION ON LOW OIL PRESSURE.
CONNECT TO GROUND SIDE OF A LIGHT OR
BUZZER TO GROUND THE CIRCUIT AND
TURN THE LIGHT OR BUZZER ON WHEN
THERE IS LOW OIL PRESSURE.
KEY:
IM - IGNITION MODULE
LOP - SWITCH, LOW OIL PRESSURE
(CLOSES ON LOW PRESSURE)
SM - STARTER MOTOR
SW - SWITCH, START/STOP
SP - SPARK PLUG
FS - FUEL SHUTOFF SOLENOID
SUPPLIED BY
CUSTOMER
RED
12V
SUPPLY 12V TO
CRANK ENGINE
SUPPLY 12V TO ALLOW FUEL FLOW
Figure 6-10. Typical 12 Volt Wiring Diagram
BLACK
T TO KILL IGNITION
SM
SOLENOID
OPTIONAL CHARGING SYSTEM
SUPPLIED BY
CUSTOMER
STATOR
6-5
SECTION 6: ELECTRIC STARTER
Figure 6-9.
SP
IM
SP
IM
+
WHITE
WHITE
SUPPLIED BY
CUSTOMER
VOLTAGE
REGULATOR
BATTERY