Server Settings - Canon ScanFront 300 Instructions Manual

7.

Server Settings

From the Server Settings screen, you can configure mail server settings for sending images via e-mail, and settings for accessing a
network authentication server compatible with a directory service.
IMPORTANT
• You can simplify user administration on the scanner by using e-mail addresses registered on an LDAP server, or by logging in from user
accounts that are registered on a domain server and are compatible with Active Directory or LDAP servers.
• Configure the server settings only after consulting your network administrator.
a
b
c
d
e
f
g
Chapter 6 Web Menu (Administrator Mode)
a E-mail Sever / Fax Settings
Configure the mail server to be used for sending e-mail, or
the Internet fax service provider to be used for sending fax.
For details, consult your e-mail system administrator.
a
"E-mail Server/Fax Settings" on p. 6-34.)
b Authentication Server
Configure the domain server (authentication server) on
which user accounts have been registered with Active
Directory.
c Address Book Server
b
Configure these settings when using an LDAP server.
"Address Book Server" on p. 6-36.)
d FTP server
Configure this function to transfer a scan result log along
with an image file during transfer to the FTP server.
"FTP server" on p. 6-37.)
c
e NTP Server
Configure the NTP server to synchronize the ScanFront
with the correct time.
d
f ScanFront Service Server
e
When a ScanFront Service Server (i.e., a computer on
which ScanFront Service is installed) exists on the
f
network, use this to specify the host name of the server and
the port number used for transmission.
g
Service Server" on p. 6-37.)
g Certificates
Import the root certificate of the LDAP server to the
ScanFront.
6-33
(See "Authentication Server" on p. 6-35.)
(See "NTP Server" on p. 6-37.)
(See "ScanFront
(See "Certificates" on p. 6-37.)
(See
(See
(See