Configuring Administrator Settings; Logging In To The Administrator Settings - Canon ScanFront 300 Instructions Manual

4.

Configuring Administrator Settings

Enter the administrator password and log in to configure administrator settings.
❏ Logging In to the Administrator Settings
Follow the procedure below to configure the [Device
name] and [IP address] needed to connect the scanner to a
network.
1.
Press [Administrator setting].
The [Administrator Password] input box appears.
2.
Press [OK] to display the [Administrator setting]
screen.
No administrator password is set by default.
3.
Select the setting item to configure.
3-8
Chapter 3 ScanFront Setup