•
Place the rim halves in the tyre from the outside.
•
Pump up the tyre a little.
•
Re-position the Allen screws in the rim and tighten them firmly. Make sure the inner tube
does not get pinched between the rims halves!
•
Check to make sure that the tyre is squarely in place on the rim.
•
Pump up the tyre to the recommended tyre pressure.
•
Check to make sure that the tyre is still squarely and snugly in place on the rim.
•
Screw the valve cap back on.
•
Refit the wheel.
129