Repair the flat tyre
EXPLOSION HAZARD!
The wheel explodes if the air is not left out before dismantling!
• It is imperative that you let the air out of the tyre before dismantling it (press the pin in the
middle of the valve downwards)!
•
Remove the valve cap.
•
Let the air out of the tyre completely by pressing the pin
in the centre of the valve in.
•
Remove the 5 Allen screws (1)
•
Take the tyre and the inner tube off of the rim halves.
•
Repair the inner tube and re-fit, or replace it with a new
one.
NOTE
In case the old inner tube is to be repaired and used again, and it happens to get wet during
repair, then it is easier to re-fit it if you powder it lightly with talcum powder.
128