The Menu Tree - Audiolab 8300A User Instructions

7: The Menu
The menu enables you to customize the unit and optimize the interface with other equipment in your system.
8300A has 9 different menu pages. Pressing the MODE knob on the front panel can also enter the menu mode, rotating this knob turns through the menu pages, press the MODE knob again to enter any menu page
and rotate the knob to change the setting, press the MODE knob again to select a setting. No operation for 5 seconds will exit the menu mode automatically. The settings will not take effect if the MODE knob is not
pressed.

The Menu Tree

The chart shows the menu options, main menu with default settings are at the top.
Display Brightness Phono Mode
High MM
Display Brightness Phono Mode
Low MC
Display Brightness
Off
Default Mode Default Input Trigger Out Control
Integrated AUX 1
Default Mode Default Input Trigger Out Control
Pre-Power AUX 2
Default Mode Default Input
Pre VIDEO
Default Input
TUNER
Default Input
CD
Default Input
PHONO
Default Input
XLR
Trigger In Control
Enable Enable
Trigger In Control
Disable Disable
Page 8
Auto Standby Factory Reset
Never No
Auto Standby Factory Reset
20 Minutes Reset
Software Version
Ver : 0.012