Table of Contents
Advertisement
1-4 TX200 Remote: First Glance
The following chart corresponds to the graphic on the right that depicts the TX200 transmitter.
Number
1
Power switch
2
Battery door
3
Selector knob
4
Display screen
5
4 Preset Buttons
6
Lanyard loop
1-5 TX200 Remote: Requirements
The TX200 transmitter operates on a single 9V battery. It is recommended that you use a high
quality alkaline battery.
Installing the Battery in the TX200 Remote
1.
Access the battery compartment by removing the door from the back of the remote.
The door slides down and off of the remote.
2.
Attach the 9V battery to the power wire in the back of the remote.
3.
Slide the battery compartment door back on the remote.
Description
7
Advertisement
Table of Contents
