Sony Bravia KLV-52Z550A Operating Instructions Manual page 36

Set-up
USB Auto Start
Quick Start
Video Labels
Video 1 Input/Output Switches the video jack
Auto S Video
Video 3/Component 1
Input
HDMI Set-up
36
GB
Automatically starts photo playback when the TV is turned on and a digital still camera
or other device storing photo files is connected to the USB port then turned on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
The TV turns on faster than usual by turning on the power using the remote.
However, power consumption in standby mode is approximately 16 watts higher than
usual. Up to 3 out of 5 time zones can be set.
Assigns an icon or name to the external inputs. The icon and name appears briefly
on the screen when the particular input is being selected.
1
Press F/f to select the desired input source, then press
Skip Inputs For each input, sets whether or not to display on the Home
Menu or in a list of inputs that will appear when you press
Auto
Displays the icon and name only when the equipment is
connected.
Always Display
Always displays the icon and name regardless of whether or
not the equipment is connected.
Skip
Does not display the icon and name even if the equipment is
connected.
2
Press g to assign an icon and name.
Label Inputs
Uses preset labels to assign a name to connected equipment.
Allows you to create your own label when you select "Edit".
Edit
Allows you to edit the name in the edit screen and choose the
appropriate icon.
When set to "Output", outputs whatever is being viewed on the screen (except
signals from the /
jacks).
Sets the input signal from S video socket/jack
equipment connected to the
Switches between the component video jack
~
• You cannot use the component video jack
same time.
Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that
communication settings must also be made on the connected equipment.
Control for HDMI Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for
HDMI. When set to "On", the following functions are
available.
If the specific Sony equipment that is compatible with control
for HDMI is connected, this setting is applied to the
connected equipment automatically when the "Control for
HDMI" is set to "On" using the TV.
Auto Devices Off When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you turn
off the TV by remote.
.
and audio jack
1 or 2, HDMI IN1, 2, 3, or 4 and
Video 1 and
1 and the video jack
1 and the video jack
.
between input and output modes.
/ PC IN sockets/
Video 1 when you have
Video 1 sockets/jacks.
3.
3 at the