General Description; Specifications - Milwaukee 2000D Owner's Manual

0283752E.qxd 4/9/03
Heat Gun Model 2000D

GENERAL DESCRIPTION

This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.

Specifications

Housing: . . . . . . . . . . . . .Engineered high-impact corrosion and heat-resistant polymers
Wattage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 watts. Operates on 110-120 VAC
Heat Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130°F to 1000°F.
BTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approximately 4100 BTUs.
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 pounds.
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove stickers and floor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic film for wrapping or weatherproofing
• Loosen rusted nuts, bolts and fittings
Use
Removing: Urethane from furniture and woodwork . . .3 to 6 . . . . . . . . .Concentrator or Flare
Bumper stickers . . . . . . . . . . . . . . . . . . . . .3 to 5 . . . . . . . . .Open (no tip)
Formica . . . . . . . . . . . . . . . . . . . . . . . . . . .8 to 10 . . . . . . . .Open (no tip)
Linoleum . . . . . . . . . . . . . . . . . . . . . . . . . .8 to 10 . . . . . . . .Open (no tip)
Caulk . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 to 10 . . . . . . . .Concentrator
Automotive Paint . . . . . . . . . . . . . . . . . . . .8 to 10 . . . . . . . .Concentrator or Flare
Window Putty (use heat shield) . . . . . . . . .8 to 10 . . . . . . . .Concentrator or Flare
Drying: Metal surfaces prior to painting . . . . . . . . .4 to 10 . . . . . . . .Concentrator
Concrete prior to patching . . . . . . . . . . . . .4 to 10 . . . . . . . .Concentrator
Ignition systems . . . . . . . . . . . . . . . . . . . . .3 to 6 . . . . . . . . .Open (no tip)
Heating: Shrink tube/wrap . . . . . . . . . . . . . . . . . . . .2 to 5 . . . . . . . . .Open (no tip)
Window shrink coverings . . . . . . . . . . . . . .1 to 4 . . . . . . . . .Open (no tip)
Frozen locks and water pipes . . . . . . . . . .3 to 6 . . . . . . . . .Concentrator
Bearings and gears for easier assembly . .5 to 8 . . . . . . . . .Concentrator
Loosening rusted bolts/nuts . . . . . . . . . . . .8 to 10 . . . . . . . .Open/Concentrator
Use instead of Bunsen Burner . . . . . . . . . .4 to 10 . . . . . . . .Open (no tip)
Soldering water pipes . . . . . . . . . . . . . . . . . . . . . . . . . .10 . . . . . . . . . . . .Concentrator
Welding plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 . . . . . . . . . . . .Concentrator
Bending plastic, plexiglass, formica . . . . . . . . . . . . . . .4 to 10 . . . . . . . .Open/Concentrator
Waxing skis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 to 5 . . . . . . . . .Open (no tip)
Defrosting refrigerator freezer . . . . . . . . . . . . . . . . . . . .8 to 10 . . . . . . . .Open (no tip)
2
English
11:26 AM Page 2
Heat Setting Nozzle Tip Options
©1996 MHT Products, Inc. All rights reserved.