Recording - HIKVISION DS-7100NI-SL Quick Operation Manual

Quick Operation Guide of Network Video Recorder
No. Name
2 Live View Window
3 Play Control Bar
4 PTZ Control
Video Parameters
5
Configuration
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon Description
Select the window-division
mode
Capture pictures in the live
view mode
Previous page
Open/Close audio
/
Adjust volume
Full-screen

Recording

Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1. Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Schedule to enable recording schedule.
4. Choose the day in a week to configure scheduled recording.
5. Click Edit to edit record schedule.
1) Configure All Day or Customize record:
Description
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
PTZ function can only be realized if the connected camera supports
PTZ control.
Brightness, contrast, saturation and hue of the image can be edited.
button on the toolbar to start the live view of all cameras on the device list.
14
Icon Description
Start/Stop all live view
/
Start/Stop all recording
/
Next page
Start/Stop two-way audio
/
Enable/Disable digital zoom
/