Startup And Shutdown; Live View; Adding Ip Cameras - HIKVISION DS-7100NI-SL Quick Operation Manual

Quick Operation Guide of Network Video Recorder

Startup and Shutdown

Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible
Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on the front panel should
be red, indicating the device gets the power supply.
To shut down the NVR:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Select the Shutdown button.
3. Click the Yes button.
4. Unplug the power supply when the shutdown attention pops up.
After the device starting up, the wizard will guide you through the initial settings, including editing password,
date and time settings, network settings, HDD initializing, and recording.

Live View

Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the
record and alarm in the channel, so that you can find problems as soon as possible.
Alarm (video loss, tampering, motion detection or sensor alarm).
Record (manual record, continuous record, motion detection or alarm triggered record)
Alarm & Record

Adding IP Cameras

Purpose:
You should add and configure the online IP cameras to enable the live view and recording function, and you can
search and add the online IP cameras by following the startup wizard, or according to the following steps.
Steps:
1. Right-click the mouse when you in the live view mode to show the right-click menu.
2. Select Add IP Camera in the pop-up menu and select Auto or Manual on your demand.
18