Table of Contents
Advertisement
Getting Started
Assemble the Interwrite Pens
The Interwrite Pen is an electronic pen that sends
positional signals to the Interwrite Panel's electromag-
netic digitizer to control cursor movement. The two
buttons on the black Pen barrel provide additional
mouse-like cursor control. The lower button, the one
closest to the Pen Tip, acts as a double-click when you
press it. The upper button provides right-click capabil-
ity.
Replace Pen Battery
The Interwrite Pen is powered by a single AAA battery.
The following instructions describe how to insert the
batteries that shipped with the Pens.
1
Unscrew the Pen, separating the black end with the
Pen Tip from the silver barrel. If needed, remove
and dispose the old battery.
2
Insert a AAA battery into the silver cradle with the
positive pole (the + end with the protruding button)
pointing toward the Pen Tip.
3
When the battery is in place, screw the two Pen
halves back together.
Each Interwrite Pen comes with two replacement Pen
Tips. Pull out the used Tip and snap a replacement Tip
into place in the end of the Pen barrel.
Store the Interwrite Pen in the Pen Holder on the back
of the Interwrite Panel.
Turning the Pen On and Off
Press the button on the top of the pen to turn the
Interwrite Pen on and off.
Interwrite
Panel
TM
On-Off
Switch
Right-
Click
Double-
Click
Pen
Tip
7
Advertisement
Table of Contents
