Interwrite
10
TM
Set Up and Connect Your Interwrite Panel
Tilt Stand Setup
When you remove the Interwrite Panel from its shipping box, the Tilt
Stand is pointing toward the top of the Interwrite Panel. Pull up on the
Release Lever and swing the Tilt Stand down to its normal operating
position with the buttons on the front of the Interwrite Panel located at
the top of the monitor and the Interwrite Panel logo at the bottom. Use
the Release Lever to adjust the Tilt Stand to the tilt position you prefer.
Release Lever
Pen Holder
Tilt Stand
Assembly
Tilt Stand
Panel
Getting Started